Aluminium ornamental protective railing bollard
SKU: SAOPR
Unit: pc
Delivery time: 2-3 nädalat
Unit: pc
Delivery time: 2-3 nädalat
Aluminium ornamental protective railing bollard.
- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°
- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°
Similar products
OP2 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP2.
, Delivery time: 1 nädal
OP8 is a balustrade / single Inline Handrail & Kerbrail for level and ramp applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP8.
, Delivery time: 1 nädal
OP18 single offset handrail / on hob for stairs & level applications under one metre (FFL) with offset (often used on concrete hobs).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP18.
, Delivery time: 1 nädal
OP24 is top rail / handrail & bottom rail bikeway barrier with offset top rail, handrail and bottom rail for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP24.
, Delivery time: 1 nädal
OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP30.
, Delivery time: 1 nädal
OP32 is a single offset handrail / wall mounted for level, ramp and stair applications with suitable substrate for mounting.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP32.
, Delivery time: 1 nädal
