Bicycle Service Station Basic

The bicycle repair station PRS-LV2 is adapted for use in public spaces. Its body is made of thick galvanized or stainless steel. The device can be installed on the ground or wall with special anchors. The tools are attached to stainless steel cables.

The standard equipment includes:
Galvanized steel body - powder coating.
• Phillips screwdriver
• flat screwdriver
• TORX screwdriver |9|10|15|20|25|27|30|40|
• hex key set | 2 | 2.5 | 3 | 4| 5 | 6 | 8 | e.g
• wrench 8x10 | 13x15 | e.g
• adjustable wrench
• tire levers (plastic with steel core) 3x
• hand pump with pressure up to 10 BAR, different nozzles
• installation kit (4x anchor, M10, 80mm)
• socket head screws
• powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 29 x 29 cm
1 x 85 x 24 cm
1 x 145 x 24 cm

The following options can be purchased additionally:
• Stainless steel AISI 304 body - powder paint.
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination.
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)

The bicycle service station SCANDIC is a compact version of the PRS-LV2 model.
Its body is made of thick galvanized or stainless steel. The device can be installed on the ground or wall with special anchors. The tools are attached to stainless steel cables.

The standard equipment includes:
Galvanized steel body - powder coating
• Phillips screwdriver PH2
• Flat screwdriver 5.5 mm
• Adjustable spanner 0-32 mm
• Spanner 8×10 mm
• Spanner 13×15 mm
• TORX screwdriver T9-T40
• Allen key set 2-8 mm
• Tire levers x 3
• Hand pump with pressure up to 10 BAR, different nozzles
Installation kit (4 x anchor M10)
• Security screws with sockets
• Powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 25 x 24.5 cm
1 x 12 x 124 cm
1 x 12 x 65 cm

As additional equipment, it is possible to purchase:
Stainless steel AISI 304 body - powder paint
Stainless steel AISI 304 body - brushed INOX
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)

The bicycle service station is easy to use in public places such as bike paths, parks, in front of hotels, campsites and other important places for cyclists. The service station is equipped with basic repair tools and a foot pump.

The station includes:
• adjustment key
• chain tool
• 2.5-8 mm hex key set
• multipurpose tool
• TX screwdriver 10, 25
• PX and flat screwdriver
• cone keys with dimensions of 13, 14, 15 and 17 mm
•also levers for disassembling and assembling the tire.

The bike can easily be placed on the rubber frame supports and all tools are secured with strong wire inside the frame body.
The service station must be attached to the ground for use. Anchors are not part of the delivery set.

The Basic Bicycle Service Station is intended for use in public places.
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
The station has a galvanized body and is coated with powder paint.

The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire buckets
-230V compressor pump

The E-bike service station is intended for use in public places.
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
In addition, it is also possible to charge electric wheels to the E-bike module today.

The station has a galvanized body and is coated with powder paint.

The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire lever
-Manometer pump
-E-bike module for charging electric bicycles or scooters.

Size: 654x719xH1684mm

The wall-mounted bicycle service station is ideal for installation in places with limited space.
The station has a galvanized body and is powder coated.

The design allows the bike to be placed on supports that allow the bike to be repaired or inspected.

The following tools are available on the station:
- screwdrivers
- universal key
- socket wrench,
- adjustable wrench
- tire levers.

Stainless steel cables hold the tool to the station. Option to buy additional equipment. Up to 20 tools can be hung on the station.