Bicycle Service Station Basic with pump
SKU: BM2021
Unit: pc
Qty: Out of Stock
Delivery time: 3-4 nädalat
Unit: pc
Qty: Out of Stock
Delivery time: 3-4 nädalat
Price:
1005,00 €
price inc. tax 1226,10 €
The Basic Bicycle Service Station is intended for use in public places.
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
The station has a galvanized body and is coated with powder paint.
The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire lever
-Manometer pump
Size: 654x613xH1411mm
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
The station has a galvanized body and is coated with powder paint.
The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire lever
-Manometer pump
Size: 654x613xH1411mm
Files
Similar products
The Basic bicycle service station is also intended for use in public places.
The standard equipment includes:
Galvanized steel body - powder paint (base color from the list)
• Phillips screwdriver PH2
• Flat screwdriver 5.5 mm
• Adjustable spanner 0-32 mm
• Allen key set 2-8 mm
• Tire levers x 2
• Hand pump with pressure up to 10 BAR, different nozzles
• IP installation kit (4 x anchor M10)
• Security screws with sockets
• Powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil) with dimensions: 4 x 10.5 x 50 cm
For an additional fee, it is possible to purchase:
• Stainless steel AISI 304 body - powder paint
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog) *Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 3 x reverse loop
• Ground plate with mobile installation (hot-dip galvanized)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or galvanized steel)
The standard equipment includes:
Galvanized steel body - powder paint (base color from the list)
• Phillips screwdriver PH2
• Flat screwdriver 5.5 mm
• Adjustable spanner 0-32 mm
• Allen key set 2-8 mm
• Tire levers x 2
• Hand pump with pressure up to 10 BAR, different nozzles
• IP installation kit (4 x anchor M10)
• Security screws with sockets
• Powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil) with dimensions: 4 x 10.5 x 50 cm
For an additional fee, it is possible to purchase:
• Stainless steel AISI 304 body - powder paint
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog) *Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 3 x reverse loop
• Ground plate with mobile installation (hot-dip galvanized)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or galvanized steel)
SKU: 34216913247
, Delivery time: 4-5 nädalat
The bicycle repair station PRS-LV2 is adapted for use in public spaces. Its body is made of thick galvanized or stainless steel. The device can be installed on the ground or wall with special anchors. The tools are attached to stainless steel cables.
The standard equipment includes:
Galvanized steel body - powder coating.
• Phillips screwdriver
• flat screwdriver
• TORX screwdriver |9|10|15|20|25|27|30|40|
• hex key set | 2 | 2.5 | 3 | 4| 5 | 6 | 8 | e.g
• wrench 8x10 | 13x15 | e.g
• adjustable wrench
• tire levers (plastic with steel core) 3x
• hand pump with pressure up to 10 BAR, different nozzles
• installation kit (4x anchor, M10, 80mm)
• socket head screws
• powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 29 x 29 cm
1 x 85 x 24 cm
1 x 145 x 24 cm
The following options can be purchased additionally:
• Stainless steel AISI 304 body - powder paint.
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination.
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)
The standard equipment includes:
Galvanized steel body - powder coating.
• Phillips screwdriver
• flat screwdriver
• TORX screwdriver |9|10|15|20|25|27|30|40|
• hex key set | 2 | 2.5 | 3 | 4| 5 | 6 | 8 | e.g
• wrench 8x10 | 13x15 | e.g
• adjustable wrench
• tire levers (plastic with steel core) 3x
• hand pump with pressure up to 10 BAR, different nozzles
• installation kit (4x anchor, M10, 80mm)
• socket head screws
• powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 29 x 29 cm
1 x 85 x 24 cm
1 x 145 x 24 cm
The following options can be purchased additionally:
• Stainless steel AISI 304 body - powder paint.
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination.
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)
SKU: 34216913249
, Delivery time: 4-5 nädalat
The bicycle service station SCANDIC is a compact version of the PRS-LV2 model.
Its body is made of thick galvanized or stainless steel. The device can be installed on the ground or wall with special anchors. The tools are attached to stainless steel cables.
The standard equipment includes:
Galvanized steel body - powder coating
• Phillips screwdriver PH2
• Flat screwdriver 5.5 mm
• Adjustable spanner 0-32 mm
• Spanner 8×10 mm
• Spanner 13×15 mm
• TORX screwdriver T9-T40
• Allen key set 2-8 mm
• Tire levers x 3
• Hand pump with pressure up to 10 BAR, different nozzles
Installation kit (4 x anchor M10)
• Security screws with sockets
• Powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 25 x 24.5 cm
1 x 12 x 124 cm
1 x 12 x 65 cm
As additional equipment, it is possible to purchase:
Stainless steel AISI 304 body - powder paint
Stainless steel AISI 304 body - brushed INOX
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)
Its body is made of thick galvanized or stainless steel. The device can be installed on the ground or wall with special anchors. The tools are attached to stainless steel cables.
The standard equipment includes:
Galvanized steel body - powder coating
• Phillips screwdriver PH2
• Flat screwdriver 5.5 mm
• Adjustable spanner 0-32 mm
• Spanner 8×10 mm
• Spanner 13×15 mm
• TORX screwdriver T9-T40
• Allen key set 2-8 mm
• Tire levers x 3
• Hand pump with pressure up to 10 BAR, different nozzles
Installation kit (4 x anchor M10)
• Security screws with sockets
• Powder coating, available in 19 RAL shades
• Print design and visualization
• Advertising surface in front and on both sides (monomer foil)
with dimensions:
1 x 25 x 24.5 cm
1 x 12 x 124 cm
1 x 12 x 65 cm
As additional equipment, it is possible to purchase:
Stainless steel AISI 304 body - powder paint
Stainless steel AISI 304 body - brushed INOX
• Individual RAL color
• Anti-graffiti plastic paint (color selection from the catalog)* Stainless steel AISI 304 cannot be painted
• Advertising printing on high-quality foil + lamination
• Promotional print on the back
• 4 x burglar bolts with the corresponding nozzle (fixed in the ground)
• Aluminum pump head + reinforced pump hose
• Reinforced pump piston (AISI 304)
• Pump hose with steel mesh
• 4 x reverse loop
• Fine-tipped tweezers
• Pneumatic skateboard holder
• Waterproof aluminum frames (for replaceable A4 content)
• Small side or rear wheel holder (stainless steel AISI 304)
• Large wheel holder (Stainless steel AISI 304 or Galvanized steel)
SKU: 34216913248
, Delivery time: 4-5 nädalat
Suitable for pumping tires for bicycles, scooters, wheelchairs and prams.
The station has a galvanized body and is coated with powder paint.
Size: Ø260xH595mm
The station has a galvanized body and is coated with powder paint.
Size: Ø260xH595mm
SKU: BM2024
, Qty: Out of Stock
395,00 €
The Basic Bicycle Service Station is intended for use in public places.
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
The station has a galvanized body and is coated with powder paint.
The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire buckets
-230V compressor pump
Suitable for pumping and minor repairs of bicycles, scooters, wheelchairs as well as pram tires.
The station has a galvanized body and is coated with powder paint.
The following tools are available at the station:
-Screwdriver
-Universal key
-Wrench
-Adjustable wrench
-Tire buckets
-230V compressor pump
SKU: BM2023
, Qty: Out of Stock
1860,00 €
The wall-mounted bicycle service station is ideal for installation in places with limited space.
The station has a galvanized body and is powder coated.
The design allows the bike to be placed on supports that allow the bike to be repaired or inspected.
The following tools are available on the station:
- screwdrivers
- universal key
- socket wrench,
- adjustable wrench
- tire levers.
Stainless steel cables hold the tool to the station. Option to buy additional equipment. Up to 20 tools can be hung on the station.
The station has a galvanized body and is powder coated.
The design allows the bike to be placed on supports that allow the bike to be repaired or inspected.
The following tools are available on the station:
- screwdrivers
- universal key
- socket wrench,
- adjustable wrench
- tire levers.
Stainless steel cables hold the tool to the station. Option to buy additional equipment. Up to 20 tools can be hung on the station.
SKU: BM2023S
, Qty: Out of Stock