Bikeway barrier OP21

OP6 is a balustrade / toeboard for level applications, greater than one metre
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP11 is a balustrade / double offset handrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP16 is a single inline handrail / midrail & kerbrail for disabled ramps under one metre (FFL) and midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP29 is a double offset handrail / kerbrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Aluminium ornamental protective railing bollard.

- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°

Horizontally opening swing gate, no separate support post needed
Locking mechanism: padlock, triangular key, or cylinder lock
Finishing: hot-dip galvanized or hot-dip galvanized with red and white reflective stickers
Installation: for casting in concrete or fixed to the ground with a base plate
Width options: 1500, 2000, 2500, 3000, 3500mm
Gate height: 950 mm