Class road stud Ø100mm

- made of glass
- diameter 50 mm
- height of the protruding part from the ground after installation: 11mm
- 100J
- load capacity 27T
- EN 1463-1 & 2

Suitable for installation on a concrete surface.
For example:
concrete ties, (double) paving stones, tiles, etc.

ATTENTION!
Do not use on asphalt!

- made of glass
- diameter 50 mm
- height of the protruding part from the ground after installation: 11.5 mm
-> 150J
- Can be installed on both asphalt and concrete roads.
Also suitable for: concrete elements, curb stones, tiles, etc.

- made of glass
- diameter 50 mm
- height from the ground after installation: 11mm
- 100J
- load capacity 27T
- EN 1463-1 and 2

Suitable for installation on a concrete surface.
about:
concrete ties, (double) paving stones, tiles, etc.

ATTENTION!
Do not use on asphalt!

- made of glass
- diameter 100 mm
- height from the ground after installation: 18.5mm
-> 150J
- load capacity 80T
- EN 1463-1 & 2

Can be installed in both asphalt and concrete
For example:
double paving stones,
RWS tires,
ordinary plates etc.

3x better light reflection than other products of the same class.

- made of glass
- diameter 75 mm
- height from the ground after installation: 17mm
-> 150J
- load capacity 60T
- EN 1463-1 & 2

Can be installed in both asphalt and concrete
For example:
double paving stones,
RWS tires,
ordinary plates etc.

Road surface reflectors are particularly effective in places where there is a high risk of accidents, sharp curves, winding roads with little demarcation or where public lighting is not sufficient or environmentally friendly.

-Power supply: Solar panel (monocrystalline 2.5 V / 0.25 W)
-Battery: NI-MH 1.2 V / 1500 MAH
- LED: φ5; 6 pcs ultra bright LED
-Work model: permanent or flashing
-Waterproof: IP68
-Flexible solar panel, resistant to 20 tons of pressure
-Visible at a distance of 800 m
-One-way or two-way LEDs;

Installation: Can be installed in both asphalt and concrete
For example: double pavers, RWS tires, regular tiles, etc.