Column protecion – CP400

Spacers-extensions for CP200 column protection
Dimensions: 1m x 210mm
Set contains of 2 pieces.

Spacers-extensions for CP300 column protection
Dimensions: 1m x 310mm
Set contains of 2 pieces.

The pole protector is suitable for poles in sizes 160mm x 160mm to 210mm x 210mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.

- Dimensions of the opening in the middle of the pillar guard: 210*210mm/160*160mm
- Outer size: 600*600mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 23kg
- The product can be used at temperatures: -15c to +40c

To protect the support beams and posts.

Material: REFLEX (technopolymer)
Color: yellow RAL 1018, black RAL 9005
Impact resistance: 2400 J
Dimensions: ø90 L700x700 h140 mm

During installation, it should be ensured that there is a gap of 75 mm between the column protection and the column (exact drawing in the installation manual file)!

The product can be ordered in different sizes. Ask for more!

Suitable for columns with dimensions of 450mm X 450mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Column Sentry FIT is a revolutionary column guard that adjusts around different sizes. The product features four locking sides that slide into place to create a flexible, shock-absorbing pillar guard. No more guessing or finding the closest size. Corner to corner, uniform protection on all sides; the safety zone remains the same.

The Sentry FIT contains a patented air chamber that directs impact energy away from the pillar. Made from a proprietary polyethylene/vinyl blend.

The product is available in two sizes: S and M.
Pieces slide in and out to fit everyone, size within every size.


The large FIT adjusts to fit columns ranging in size from 100x100mm to 200x200mm.
M large FIT adjusts to fit columns ranging from 200x200mm to 300x300mm.
The four sides of the FIT are aligned to ensure even corner-to-corner protection. This means that regardless of the size of the column, the depth of the safety zone remains the same. Whether the FIT parts are expanded or contracted, both provide the same amount of air-cushioned protection.

The four-sided design eliminates any stiff spots on the pillar guard.