Column Protector infills for CP200 (set of 2)

The protection consists of 2 elements that are placed around the post and connected to each other using straps. Very easy to install, does not require fixing to the floor or post.
Air chambers inside the modules help absorb impact energy.

- Dimensions of the opening in the middle of the pillar guard: 110*106mm
- Outer size: 360*400mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 10kg
- The product can be used at temperatures: -15c to +40c

Universal beam protection is suitable for beams with sides from 200mm to 700mm.
The protection consists of 4 elements that can be easily cut to the desired size.
Air chambers inside the modules help absorb impact energy.

- Made of LLDPE material (linear chain low density polyethylene).
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 16kg
- The product can be used at temperatures: -15c to +40c

Spacers-extensions for CP300 column protection
Dimensions: 1m x 310mm
Set contains of 2 pieces.

Suitable for columns with dimensions of 450mm X 450mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

Suitable for columns with dimensions between 200mm x 200mm and 300mm x 300mm. Protection contains 2 elements, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.

– dimensions: 450 x 450 mm (K) 1100 mm
– material: polyethylene
– tensioning straps (2200 mm)
– suitable for indoors and outdoors conditions

Column Sentry FIT is a revolutionary column guard that adjusts around different sizes. The product features four locking sides that slide into place to create a flexible, shock-absorbing pillar guard. No more guessing or finding the closest size. Corner to corner, uniform protection on all sides; the safety zone remains the same.

The Sentry FIT contains a patented air chamber that directs impact energy away from the pillar. Made from a proprietary polyethylene/vinyl blend.

The product is available in two sizes: S and M.
Pieces slide in and out to fit everyone, size within every size.


The large FIT adjusts to fit columns ranging in size from 100x100mm to 200x200mm.
M large FIT adjusts to fit columns ranging from 200x200mm to 300x300mm.
The four sides of the FIT are aligned to ensure even corner-to-corner protection. This means that regardless of the size of the column, the depth of the safety zone remains the same. Whether the FIT parts are expanded or contracted, both provide the same amount of air-cushioned protection.

The four-sided design eliminates any stiff spots on the pillar guard.