Concrete roadblock hemisphere 130kg

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 75mm x 33 m
– orange-black print
– non-reflective

The traffic sign base LMA-1 is suitable for a traffic sign post with a diameter of 60 mm, foundation height 420 mm, sole diameter 180 mm, weight 24 kg
The foundation is not intended to stand alone on the ground. The foundation must be dug into the ground!
NB! The foundation lock ring is not included. It must be purchased separately. Product code: 31051

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.

Foundation locking ring (for LMA-1, LMA-2 or road barrier). For mounting on a 60mm pole.

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 2,7m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.