Edge protection type A, Ø40 mm

Self-adhesive, hard-wearing and easy to install
Made of foam
Effectively protect vehicles and buildings
Available in black and yellow colour
Measures 750 mm length by 60 mm width by 10 mm height

length: 80cm
side length: 8 cm
thickness: 1,5 cm
weight: 1,9 kg

black plasticised-PVC
reflective foil RA2

6 Screws 6 x 40 mm

Wall protection system to protect areas that are impacted frequently or subject to friction. Made of soft material.

- temperature resistance -10...60°C
- profile dimensions: 200x20mm x pikkus 4000mm

The two-level bumper system is used where there is an increased risk of impacts in places with higher thermal loads, for example:
in frozen product warehouses
in cold areas
in parking lots
on the ramps

We supply bumpers in a length of 4 m, and if necessary, you can adjust the length as needed.

Knuffi corner protector, type A+
- made of durable polyurethane
- designed for protection of wall corners
- installation: using adhesive on the warning protection's back
- suitable for both indoor and outdoor use (-40° to +100°C)
- fire-resistant, complies with DIN 4102 B2 classification
- dimensions: Ø60 mm, corner 35 x 35 mm
- length: 1 m
- easy to cut to size
- color: yellow-black or red-white

Knuffi edge protection profile type B+
- Made from durable polyurethane
- Designed for protecting sharp or hazardous edges
- Installation: using adhesive on the back of the protective profile
- For indoor and outdoor use (-40° to +100°C)
- Fire-resistant, complies with DIN 4102 B2 classification
- Dimensions: Ø50mm, gap 12 x H25 mm
- Length: 1 m
- Easy to cut to size
- Color: yellow-black

The flat corner guard is the most popular version of the corner guard. The construction is based on a fixed 90 degree angle. Thanks to the uniform 2mm thick flat structure, the wall protector does not stand out too much from the wall and discreetly protects the wall edge from damage. The combination of PVC and acrylic material together with the special texture of the surface given in the production process of the product makes the product mechanically resistant to cracks, breaks and scratches.

- Available in widths: 65 mm x 65 mm, 50 mm x 50 mm, 30 mm x 30 mm, 25 mm x 50 mm
Available lengths: 1m, 1.5m, 2m, 3m.
- Combination of PVC and acrylic material
- wide range of colors
- textured surface finish
- mounting method: mounting adhesive or self-adhesive tape
- fire safety with certificate
- easy to clean
- scratch resistant
- impact resistant
- UV safe
- antibacterial