Loading...
Flexirail barrier H900mm
SKU: 34216913118
Unit: pc
Qty: Out of Stock
Unit: pc
Qty: Out of Stock
FlexiRail flexible barriers are suitable for installation in places where pedestrians and cyclists tend to cross the road in the wrong place or where there is a high risk of accidentally stepping on the road. With the help of FlexiRail barriers, it is easier for road users to orient in traffic and thus prevent dangerous situations.
Module dimensions: 1800x240xH880mm
Module dimensions: 1800x240xH880mm
Similar products
OP8 is a balustrade / single Inline Handrail & Kerbrail for level and ramp applications above one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP8.
, Delivery time: 1 nädal
OP25 is top rail / balustrade Infill bikeway barrier with offset top rail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP25.
, Delivery time: 1 nädal
OP28 is a double offset handrail / on hob.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP28.
, Delivery time: 1 nädal
OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP30.
, Delivery time: 1 nädal
OP31 is twin double offset handrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP31.
, Delivery time: 1 nädal
OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP5.
, Delivery time: 1 nädal
