Grill lamp FAL03 (M53) All In One 3-LED System, amber

20 x 0,25W LED
3 flashing patterns
24V
2 pieces in set

132x50x19mm
Amber warning lamp with amber Halo-ring
warning light 6LED, Halo-ring 18LED
14 flashing options, several flashers can be synchronized together
12-24V
Screws: 120mm
Approval: SAE J595 Class1 (A/B/R/W); SAE J592 (A/R); SAE J2042 (A/R); CA Title13 (A/B/R); ECE R7 (R/W); ECE R10; ECE R65 (XA1, XB1); ECE R91 (A)
IPx8

Voltage: 10-30V
9xLED 360 ° amber
set includes two turn signals.
Can be concealed in front / rear / edge light or as a surface light.
Good visibility around 360 degrees.
12V 1.2A / 24V 0.7A

Warning light for rear lifting.
4x2W LEDs.
The lamp is a certified product.
ECE R6, ECE R10.
Materials: Lens: PC, Housing: AL. Fastening is screw.
The voltage is 12 V/24 V.

voltage is 12V/24V
4x LEDs 115W
3 warning flashes
wire: 200 mm
dimensions: 98x31x6mm
protection class IP67
according to standards such as ECE R10, ECE R65

The OPTIBEAM FLEX LM6 warning light offers completely new possibilities in terms of installation location. The light, which can be installed on surfaces curved up to 120 degrees, can be installed, for example, on the support leg of a crane, on the corners of a vehicle, or on other surfaces where a light with a straight and rigid body could not be used before. The design is aerodynamic and takes into account today's demands in terms of functions and attachments, including interference protection CISPR CLASS 3 (no radio interference) and ECE R65 class 2 (allowed in traffic both day and night), as well as IP67 protection class against water and dust. In addition, the FLEX LM6 has dual memory with separate wiring to quickly switch between steady light and warning light modes.

- Dimensions: 126.8 x 30.2 x 10.7 mm
- Bends up to 120° to fit a curved mounting surface.
- made of Dow Silastic silicone
- aerodynamic: minimal wind resistance
- screw fastening with glue, screw covers
- white glass.
- 6 High-Power LEDs
- 20 flashing modes, double memory, synchronisable: up to 20 lights
- short circuit protection, weatherproof, vibration resistant.
- working temperature: -40° ... +65°C
- Certificates: ECE R65 Class 2, ECE 10, SAE J595 Cl.1, SAE J845 Cl.1, CISPR25 Cl.3, CA13
- Cable length: 300 mm
- Voltage: 12/24V