GRO 2300 COMBINATION
SKU: GRPNC.2300.Ct
Unit: pc
Delivery time: 8-10 nädalat
Unit: pc
Delivery time: 8-10 nädalat
The GRO series has a playful yet timeless design. The bench can be produced both with and without armrests.
It has variations as a 1-seater, 2-seater or 3-seater bench.
Benches and trash cans are also available in the same series to create a complete solution in an urban space.
Dimensions: 2584*2070*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
It has variations as a 1-seater, 2-seater or 3-seater bench.
Benches and trash cans are also available in the same series to create a complete solution in an urban space.
Dimensions: 2584*2070*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
Points of attention • All products must be unpacked immediately after delivery. • Every kind of (hard) wood will turn grey under the influence of UV radiation, weather and wind. The final colour depends on the starting colour. • Wood is a natural product that “works” and will shrink or expand depending on temperature and moisture content. • Hardwood can turn black when in contact with Corten steel, which will eventually turn gray. • Corten Steel should never be constantly in moisture, it should drain well and ventilate in all situations. • Corten Steel products are not (fully) rusted on delivery, we only use Corten steel type S355JOWP. • Coastal areas: We do not recommend using Corten steel within a radius of 2 km from a coastline. • During the weathering process rust residue can come off the product, which can result in stains. • Drilling / grinding in the material is not permitted.
Similar products
DIMENSIONS:
height: 60 cm
width: 39 cm
length: 190 cm
weight: abt 35 kg
MATERIALS
seat, backrest: varnished softwood or oiled exotic wood
structure: varnished steel or stainless steel
INSTALLATION
Boston steel bench with backrest is installed by screwing to the ground
COLOR CHOICE
seat: teak, nut brown, exotic wood
structure: light grey, dark grey, black
height: 60 cm
width: 39 cm
length: 190 cm
weight: abt 35 kg
MATERIALS
seat, backrest: varnished softwood or oiled exotic wood
structure: varnished steel or stainless steel
INSTALLATION
Boston steel bench with backrest is installed by screwing to the ground
COLOR CHOICE
seat: teak, nut brown, exotic wood
structure: light grey, dark grey, black
SKU: 001231
DIMENSIONS
height: 81 cm
width: 70 cm
length: 180 cm
weight: abt 103 kg
MATERIALS
seat, backrest: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 81 cm
width: 70 cm
length: 180 cm
weight: abt 103 kg
MATERIALS
seat, backrest: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001261
DIMENSIONS
height: 46 cm
width: 39 cm
length: 190 cm
weight: abt 32 kg
MATERIALS
seat, backrest: varnished softwood
bases: varnished aluminium
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat: teak, nut brown
Base: dark gray, black
height: 46 cm
width: 39 cm
length: 190 cm
weight: abt 32 kg
MATERIALS
seat, backrest: varnished softwood
bases: varnished aluminium
INSTALLATION
The bench is installed by screwing it to the ground
COLOR CHOICE
Seat: teak, nut brown
Base: dark gray, black
SKU: 001129
DIMENSIONS
height: 43 cm
width: 50 cm
length: 60 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
height: 43 cm
width: 50 cm
length: 60 cm
weight: abt 40 kg
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The bench is installed by screwing it to the ground
SKU: 001263
Straight bench. Perfect for both indoor and outdoor use. Suitable for various social and cultural spaces to create the necessary resting places or seating.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The product is designed for both temporary and permanent spaces, which is why it is perfect for furnishing schools and kindergartens, as well as outdoor areas of amusement parks, hotels, and spas.
It is possible to stick an advertisement or your company logo on the side of the bench.
Design: AART Designers
Material:
Rotational molded polyethylene, 6-7 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
L2000 x H400mm.
Volume: 240L
Combinations & fixation:
LOOP Line can be combined with LOOP Arc details to form curved shapes and triangles.
With LOOP Corner you can form rectangles.
The modules are connected at both ends with clamps (B4- not included).
Note that the shape of the Loop Line does not allow it to stand alone unattached. It must be attached to the ground or to a LOOP Arc or LOOP Corner at either end.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Accessories:
Armrests can be placed between the modules.
Material: stainless steel, blown glass
The armrests also work as a mounting bracket. Therefore, when using armrests, the B4 mounting clips can be omitted.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 140.12
, Delivery time: 6-8 nädalat
Loop Playfield is a combination of Loop Corner and Loop Line details, which, when combined together, can be used to create permanent or temporary ball fields and playgrounds in urban spaces and schoolyards, or simply use them to demarcate space. Like the rest of the Loop family, they invite passers-by to sit, chat and observe city life.
You can stick an advertisement or your company logo on the side of the details.
Design: AART designers
Material:
Rotational molded polyethylene, 8 mm thick, painted.
Molded in one piece. UV-resistant, withstands weather conditions, wear and tear.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Playfield consists of Loop Line and Loop Corner modules.
Loop Line: L2000 x H400mm / Volume: 240 liters.
Loop angle: L1400xW1400mmxH400mm / Volume: 250 liters
Combining:
Loop Line and Loop Corner details can be combined to create several different ball courts. See sizes under options.
Assembly & fixing:
The modules are connected at both ends with clamps (B4). Clamps are included.
B2 (loop Corner) + B5 (loop Line) to set the ground.
B3 (loop angle) + B6 (loop line) is suitable for coating.
The clamps required for fixing the ground are not included in the set and must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
You can stick an advertisement or your company logo on the side of the details.
Design: AART designers
Material:
Rotational molded polyethylene, 8 mm thick, painted.
Molded in one piece. UV-resistant, withstands weather conditions, wear and tear.
Surface coating:
The product has a textured/granulated surface, thanks to which no slip is produced.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Playfield consists of Loop Line and Loop Corner modules.
Loop Line: L2000 x H400mm / Volume: 240 liters.
Loop angle: L1400xW1400mmxH400mm / Volume: 250 liters
Combining:
Loop Line and Loop Corner details can be combined to create several different ball courts. See sizes under options.
Assembly & fixing:
The modules are connected at both ends with clamps (B4). Clamps are included.
B2 (loop Corner) + B5 (loop Line) to set the ground.
B3 (loop angle) + B6 (loop line) is suitable for coating.
The clamps required for fixing the ground are not included in the set and must be ordered separately.
Color choice:
Check out the color selection under the product images.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 174
, Delivery time: 6-8 nädalat
