Handrail OP15
SKU: OP15.
Unit: m
Delivery time: 1 nädal
Unit: m
Delivery time: 1 nädal
OP15 is a single inline handrail / midrail for stairs and level applications under one metre (FFL) & midrail for extra protection.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Similar products
FlexiRail flexible barriers are suitable for installation in places where pedestrians and cyclists tend to cross the road in the wrong place or where there is a high risk of accidentally stepping on the road. With the help of FlexiRail barriers, it is easier for road users to orient in traffic and thus prevent dangerous situations.
Module dimensions: 1800x240xH880mm
Module dimensions: 1800x240xH880mm
SKU: 34216913118
, Qty: Out of Stock
OP25 is top rail / balustrade Infill bikeway barrier with offset top rail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP25.
, Delivery time: 1 nädal
OP30 is a twin offset handrail for the centre of a wide stair.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP30.
, Delivery time: 1 nädal
OP4 is a single inline handrail / mid & bottom rails for stairs and level applications under one metre (FFL) and typical fire stair applications.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP4.
, Delivery time: 1 nädal
OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.
SKU: OP5.
, Delivery time: 1 nädal
GRAVITY-CLOSING SAFETY GATES
The most efficient and durable way to protect people against accidental falls through guardrail openings.
• Proven design successfully used over 38 years
• Maintenance free
• Service life > 30 years
• TÜV tested, EN ISO 14122-3
DESIGN
• Gate automatically closes due to gravity
• Rises when opened; Returns closed when released
• Design does not depend on springs, cams, bearings, or the operator
• Gate has a horizontal swing, not a vertical drop
• Available in 4 standard sizes: 560, 690, 820, 950 mm
The most efficient and durable way to protect people against accidental falls through guardrail openings.
• Proven design successfully used over 38 years
• Maintenance free
• Service life > 30 years
• TÜV tested, EN ISO 14122-3
DESIGN
• Gate automatically closes due to gravity
• Rises when opened; Returns closed when released
• Design does not depend on springs, cams, bearings, or the operator
• Gate has a horizontal swing, not a vertical drop
• Available in 4 standard sizes: 560, 690, 820, 950 mm
SKU: UDG
, Qty: In Stock
398,00 €
