Handrail OP27

The safety fence is perfect for separating pedestrian and vehicle traffic in an urban space.

– dimensions: (L) 2000 x (H) 1100 mm
– pipe diameter Ø48.3 mm
– finish: powder coating, paint+zinc, galvanized, stainless steel
– installing method: concreteable
– weight: 10 kg

OP11 is a balustrade / double offset handrail.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP25 is top rail / balustrade Infill bikeway barrier with offset top rail and balustrade infill for level and rake.
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

OP5 is a standard balustrade for level applications, greater than one metre (FFL).
Smart clamps and a steel pipe with a size of Ø 48 mm are used for assembly. If desired, the safety barrier can also be assembled from Ø42 or Ø60mm pipe.
As a standard solution, the railings are hot-dip galvanized.

Aluminium ornamental protective railing bollard.

- coated anthrachite grey (metallic grey)
- approx. 900mm above ground
- cast aluminium with steel rod core
-bollard selection: - end post for top bar
- middle post for top bar
- corner post for top bar 90°
- end post for top and knee bar
- middle post for top and knee bar
- corner post for top and knee bar 90°

Protective railings made of 70 × 70 mm square post with height H1000 mm
cross bar 60x40 mm with lengths: 800, 1300, 1800 mm
hot-dip galvanized and coated yellow with black-striped
ground-mounted base plate
base plate dimensions: 100 x 150 mm
for protecting work sites, machines and facilitites or gateways