Installation template for 120 tactile paving nails

The tactile rubber tile is made of vulcanized rubber.
Warning tiles at bus stops, metro stations and railway platforms, and roadside architectural elements for the blind and visually impaired. The advantage of the tactile rubber tile is that it can be installed on the existing surface. Flexible and with good durability. To install it on existing concrete or asphalt surfaces, using an adhesive polymer is recommended.
Hard-wearing surface, resistant to weather and ageing.

Dimensions: 600 x 300 x 65 mm

A tactile warning plate is the tactile marking system of the surface. Warning tiles warn blind and visually impaired people about places that may endanger their safety in public spaces.

- tile dimensions: 300x300mm or 400x400mm, height 7,8 mm
- tile base thickness: 2 mm
- standard color range: white, yellow (RAL1023), light gray (RAL7042), anthracite gray (RAL7016), black (RAL9005)
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer (R-12/R-13 slip resistance

A tactile information tile, type "square" should be installed in an open public space, at public transport stations and platforms, wherever a blind person may find it helpful to find elements of space equipment and landmarks

- tile dimensions: 300x300mm, height 7 mm
- tile base thickness: 2 mm
- standard color range: white, yellow (RAL1023), light gray (RAL7042), anthracite gray (RAL7016), black (RAL9005)
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer (R-12/R-13 slip resistance

A tactile warning dome is the tactile marking system of the surface. Warning domes warn blind and visually impaired people about places that may endanger their safety in public spaces.

- dome dimensions: top Ø20, bottom Ø30, height 6 mm
- standard color range: white, but at the customer's special request, it is possible to produce in other colors
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer R-12/R-13 slip resistance

A tactile directional rail is the tactile marking system of the surface.

- rail dimensions: top 20mm, bottom 50mm, length 600mm, height 5mm
- standard color range: white, but at the customer's special request, it is possible to produce in other colors
- installation on concrete, stone, asphalt or wooden substrates with two-component glue
- anti-slip layer R-12/R-13 slip resistance

- Stainless steel 316
- Width 16 mm
- Length 280 mm
- Height: 3.8 mm
- Striped pattern
- Double-sided tape attached to the back of the button height 1mm

Lihtne paigaldus, joontähise tagaküljel äratõmmatav kaitsekile.
Paigaldus iseliimuva teibiga.
Patterns:
- diamond
- brushed
- stripe
- black