LOOP TABLE
SKU: 181
Unit: pc
Delivery time: 6-8 nädalat
Unit: pc
Delivery time: 6-8 nädalat
The LOOP TABLE round table+seat offers several seating and comfort options. Loop Table is a small colorful bench and table set.
Ideal for schools, playgrounds and other urban recreation areas.
Design: AART Designers
Material:
Table top: Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear. The material is suitable for granulation and recycling.
Frame: Ø80 mm tubes, hot-dip galvanized (HDG) steel, fully stainless bolts/screws.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Dimensions: Ø700mm / H730mm.
Table top: thickness 50 mm.
Seats 4-6.
Fixation:
The table can be ordered with three different fastening methods.
Freestanding on a three-legged frame:
The LOOP bench and the LOOP table are combined into one unit. Table frame, Ø80mm hot-dip galvanized pipes, connected to a 3-legged frame, 12mm hot-dip galvanized sheet steel. The LOOP bench and LOOP table can stand freely on any surface. The LOOP Bench can be filled with sand/water or fixed to the ground with brackets to prevent theft.
Underground installation:
LOOP Bench and LOOP table as 2 separate units. Loop board Ø80 mm hot-dip galvanized pipes buried up to 300 mm.
Surface mount with bracket:
LOOP bench and LOOP table as 2 separate units. The table has a bracket that allows it to be mounted on concrete, tiles, wood, etc. Ø80mm hot-dip galvanized pipes on flange: Ø180/H:8mm, 3 x Ø12mm mounting holes.
Color choice:
The color selection can be found in the product images.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
Ideal for schools, playgrounds and other urban recreation areas.
Design: AART Designers
Material:
Table top: Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear. The material is suitable for granulation and recycling.
Frame: Ø80 mm tubes, hot-dip galvanized (HDG) steel, fully stainless bolts/screws.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Dimensions: Ø700mm / H730mm.
Table top: thickness 50 mm.
Seats 4-6.
Fixation:
The table can be ordered with three different fastening methods.
Freestanding on a three-legged frame:
The LOOP bench and the LOOP table are combined into one unit. Table frame, Ø80mm hot-dip galvanized pipes, connected to a 3-legged frame, 12mm hot-dip galvanized sheet steel. The LOOP bench and LOOP table can stand freely on any surface. The LOOP Bench can be filled with sand/water or fixed to the ground with brackets to prevent theft.
Underground installation:
LOOP Bench and LOOP table as 2 separate units. Loop board Ø80 mm hot-dip galvanized pipes buried up to 300 mm.
Surface mount with bracket:
LOOP bench and LOOP table as 2 separate units. The table has a bracket that allows it to be mounted on concrete, tiles, wood, etc. Ø80mm hot-dip galvanized pipes on flange: Ø180/H:8mm, 3 x Ø12mm mounting holes.
Color choice:
The color selection can be found in the product images.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
Similar products
DIMENSIONS
height: 71 cm
width: 73 cm
length: 182 cm
MATERIALS
table top: varnished softwood
table top reinforcement: varnished steel
bases: concrete
INSTALLATION
Table is installed by burrying the foundations
VÄRVIVALIK
table top: teak, nut brown
height: 71 cm
width: 73 cm
length: 182 cm
MATERIALS
table top: varnished softwood
table top reinforcement: varnished steel
bases: concrete
INSTALLATION
Table is installed by burrying the foundations
VÄRVIVALIK
table top: teak, nut brown
SKU: 002303
DIMENSIONS
height: 76 cm
width: 170 cm
length: 180 cm
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The table is installed by screwing it to the ground
height: 76 cm
width: 170 cm
length: 180 cm
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The table is installed by screwing it to the ground
SKU: 002204
The GRO series has a playful yet timeless design. The bench can be produced both with and without armrests.
It has variations as a 1-seater, 2-seater or 3-seater bench.
A picnic combination and trash cans are also available in the same series to create a complete solution in an urban space.
Measurements: 2300*790*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
It has variations as a 1-seater, 2-seater or 3-seater bench.
A picnic combination and trash cans are also available in the same series to create a complete solution in an urban space.
Measurements: 2300*790*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
SKU: GRTA.2300.Ct
The LOOP CONE table can be combined with various seating elements. This allows for a large number of combinations. For example, the Loop Cone Table can be combined with the Loop Arc to create a wave pattern of seating with tables placed in between. Using HopOp poufs, on the other hand, creates circular seating groups.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
Due to special surface treatment, the products are textured/granulated, thanks to which the surface of the product is not slippery. Top table top: smooth surface.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Top: Ø1130mm / Bottom: Ø810mm / H700mm
Fixation:
Attach to the soil or to fix the surface or fill with water/sand. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
Loop Cone Table consists of Loop Cone + table top.
Loop Cone and tabletop can be the same color or two different colors (tabletop color selection: red, lime green, orange and anthracite.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
Due to special surface treatment, the products are textured/granulated, thanks to which the surface of the product is not slippery. Top table top: smooth surface.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Top: Ø1130mm / Bottom: Ø810mm / H700mm
Fixation:
Attach to the soil or to fix the surface or fill with water/sand. Clamps must be ordered separately.
Color choice:
Check out the color selection under the product images.
Loop Cone Table consists of Loop Cone + table top.
Loop Cone and tabletop can be the same color or two different colors (tabletop color selection: red, lime green, orange and anthracite.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 169.178
, Delivery time: 6-8 nädalat
Eat, enjoy and talk! Loop Cone is a combination of a table and 6 HopOp 500 stands. Such a combination gives the opportunity to create small, free-standing seats. It is a table and bench set where form, material and color come together to create fun furniture for both indoor and outdoor spaces.
The LOOP Picnic HopOp500 is a great alternative to traditional table and bench sets.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which the product is not slippery.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic consists of Loop Cone + top plate + 6 HopOp500 stands.
Loop Cone: top: Ø1130mm / bottom: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liters.
Product weight: Table + 6 stools is 58kg
Combinations:
Loop Cone and HopOp500 can be combined with different number of HopOp. The recommended number is 6 sofas (in a set). If desired, the stands can be purchased separately.
Assembly & fixing:
The Loop Cone and HopOp500 are assembled using a single fitting (B14), which is also fixed into the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and HopOp500 can also be installed as separate units by filling them with water or sand.
Color choice:
The cone, table top and HopOp seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The LOOP Picnic HopOp500 is a great alternative to traditional table and bench sets.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which the product is not slippery.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic consists of Loop Cone + top plate + 6 HopOp500 stands.
Loop Cone: top: Ø1130mm / bottom: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liters.
Product weight: Table + 6 stools is 58kg
Combinations:
Loop Cone and HopOp500 can be combined with different number of HopOp. The recommended number is 6 sofas (in a set). If desired, the stands can be purchased separately.
Assembly & fixing:
The Loop Cone and HopOp500 are assembled using a single fitting (B14), which is also fixed into the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and HopOp500 can also be installed as separate units by filling them with water or sand.
Color choice:
The cone, table top and HopOp seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 172
, Delivery time: 6-8 nädalat
Round table for sitting, eating, socializing, with 4 adjustable seat sectors.. Different levels for adults, toddlers and older children. Alternatively, the bench can be used as an extended table top. Accommodates 8-12 people in style.
Material:
Frame: hot-dip galvanized steel. Table top: Iroko wood + stainless steel.
Dimensions:
Ø1460/2300mm / H750mm
Installation:
Can be fixed to the surface. Clamps must be ordered separately.
Accessories:
Galvanized steel backrest (2 or 4), parasol, cushions/upholstery (white or blue), cushions custom made.
Maintenance
Wood does not require maintenance. Sun and wind gradually change the color to silver gray and the surface becomes rougher in outdoor conditions. If you want to maintain the original tone of the wood surface, sand and oil it annually to maintain a smooth and golden surface.
Material:
Frame: hot-dip galvanized steel. Table top: Iroko wood + stainless steel.
Dimensions:
Ø1460/2300mm / H750mm
Installation:
Can be fixed to the surface. Clamps must be ordered separately.
Accessories:
Galvanized steel backrest (2 or 4), parasol, cushions/upholstery (white or blue), cushions custom made.
Maintenance
Wood does not require maintenance. Sun and wind gradually change the color to silver gray and the surface becomes rougher in outdoor conditions. If you want to maintain the original tone of the wood surface, sand and oil it annually to maintain a smooth and golden surface.
SKU: 121
, Delivery time: 6-8 nädalat
