LOOP TABLE
SKU: 148
Unit: pc
Delivery time: 6-8 nädalat
Unit: pc
Delivery time: 6-8 nädalat
A reinterpretation of the traditional long table and bench set. A table for sitting, eating and socializing, inspired by the long rows of tables and benches characteristic of traditional beer and harvest festivals. Easy access from 4 points, seats 4-6-8 or 10 (tables of different lengths available)
Material:
Table top and seats: Iroko wood or Hellwood
Frame/legs: Folded hot-dip galvanized steel
Dimensions:
Available in four lengths: 1800 mm (4 people), 2400 mm (6 people), 3000 mm (8 people) and 3600 mm (10 people).
Color:
Frame and legs painted brown, red or white.
Table top: Hellwood or Iroko
Fixation:
Sits directly on the ground or surface mounted. Clamps must be ordered separately.
Maintenance:
Untreated wood does not require maintenance. The sun and wind change the analog color to silver gray. Fine sandpaper + oil was used once a year to maintain the golden shine and smooth surface.
Material:
Table top and seats: Iroko wood or Hellwood
Frame/legs: Folded hot-dip galvanized steel
Dimensions:
Available in four lengths: 1800 mm (4 people), 2400 mm (6 people), 3000 mm (8 people) and 3600 mm (10 people).
Color:
Frame and legs painted brown, red or white.
Table top: Hellwood or Iroko
Fixation:
Sits directly on the ground or surface mounted. Clamps must be ordered separately.
Maintenance:
Untreated wood does not require maintenance. The sun and wind change the analog color to silver gray. Fine sandpaper + oil was used once a year to maintain the golden shine and smooth surface.
Similar products
Table dimensions 2000x760xH800mm
Seat dimensions 2000x500xH500mm
galvanized and painted steel
Metal profile 50x50 mm
wood 10x100mm
Seat dimensions 2000x500xH500mm
galvanized and painted steel
Metal profile 50x50 mm
wood 10x100mm
SKU: 651.NR40
DIMENSIONS
height: 71 cm
width: 73 cm
length: 182 cm
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The table is installed by screwing it to the ground
height: 71 cm
width: 73 cm
length: 182 cm
MATERIALS
seat: oiled exotic wood
structure: varnished steel
INSTALLATION
The table is installed by screwing it to the ground
SKU: 002205
The GRO series has a playful yet timeless design. The bench can be produced both with and without armrests.
It has variations as a 1-seater, 2-seater or 3-seater bench.
A picnic combination and trash cans are also available in the same series to create a complete solution in an urban space.
Measurements: 2300*790*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
It has variations as a 1-seater, 2-seater or 3-seater bench.
A picnic combination and trash cans are also available in the same series to create a complete solution in an urban space.
Measurements: 2300*790*905mm
GRO benches have:
• Mounting holes for surface mounting
• Warranty 5 years
Material:
Frame material
• Corten steel 5 mm
• Galvanized steel 5 mm + 2 layers of powder paint
Seat material
• Material: Garapa wood
• Head sizes: 60x40 mm
Maintenance:
Regular cleaning and oiling of the wood ensures that the pigment in the wood is preserved longer and the discoloration process is delayed.
• Annual cleaning and dirt removal with clean water.
NB! Do not use a pressure washer.
SKU: GRTA.2300.Ct
Eat, enjoy and talk! Loop Cone is a combination of a table and 6 HopOp 500 stands. Such a combination gives the opportunity to create small, free-standing seats. It is a table and bench set where form, material and color come together to create fun furniture for both indoor and outdoor spaces.
The LOOP Picnic HopOp500 is a great alternative to traditional table and bench sets.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which the product is not slippery.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic consists of Loop Cone + top plate + 6 HopOp500 stands.
Loop Cone: top: Ø1130mm / bottom: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liters.
Product weight: Table + 6 stools is 58kg
Combinations:
Loop Cone and HopOp500 can be combined with different number of HopOp. The recommended number is 6 sofas (in a set). If desired, the stands can be purchased separately.
Assembly & fixing:
The Loop Cone and HopOp500 are assembled using a single fitting (B14), which is also fixed into the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and HopOp500 can also be installed as separate units by filling them with water or sand.
Color choice:
The cone, table top and HopOp seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
The LOOP Picnic HopOp500 is a great alternative to traditional table and bench sets.
Design: AART Designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which the product is not slippery.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic consists of Loop Cone + top plate + 6 HopOp500 stands.
Loop Cone: top: Ø1130mm / bottom: Ø810mm / H700mm
HopOp500: Ø500 x H400mm / Volume: 70 liters.
Product weight: Table + 6 stools is 58kg
Combinations:
Loop Cone and HopOp500 can be combined with different number of HopOp. The recommended number is 6 sofas (in a set). If desired, the stands can be purchased separately.
Assembly & fixing:
The Loop Cone and HopOp500 are assembled using a single fitting (B14), which is also fixed into the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and HopOp500 can also be installed as separate units by filling them with water or sand.
Color choice:
The cone, table top and HopOp seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary slightly depending on the residues in production)
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 172
, Delivery time: 6-8 nädalat
Eat, enjoy and talk! Loop Cone is a combination of a table and 6 Loop Up stools. Such a combination gives the opportunity to create small, free-standing seats. It is a table and bench set where form, material and color come together to create fun furniture for both indoor and outdoor spaces.
LOOP Up is great for alternative table and bench sets.
Visualize and different colors free programs: http://outsider.3dconfig.dk/tool/
Design: AART designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which no slip is produced.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic Up consists of Loop Cone table + top table top + 6 Loop Up stools.
Loop cone dimensions: top: Ø1130mm / aluminum: Ø810mm / H700mm
Loop Up dimensions: Ø540 x H400mm / Volume: 68 liters.
Combinations:
Loop Cone and Loop Up can be combined with different numbers of Loop Up studs. The recommended quantity is 6 tubs. If desired, the stands can be purchased separately.
Assembly & fixing:
Loop Cone and Loop Up are assembled using one fitting (B14), which is also fixed in the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and Loop Up can also be filled as separate units by filling them with water or sand.
Color choice:
Cone, table top and Loop Up seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
LOOP Up is great for alternative table and bench sets.
Visualize and different colors free programs: http://outsider.3dconfig.dk/tool/
Design: AART designers
Material:
Rotational molded polyethylene, 6 mm thick, painted.
A single molded piece.
UV-resistant, withstands weather conditions, wear and tear.
The material is suitable for granulation and recycling.
Surface coating:
The blocks have a textured/granulated surface, thanks to which no slip is produced.
The table has a slightly textured surface and a smooth table top.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Loop Picnic Up consists of Loop Cone table + top table top + 6 Loop Up stools.
Loop cone dimensions: top: Ø1130mm / aluminum: Ø810mm / H700mm
Loop Up dimensions: Ø540 x H400mm / Volume: 68 liters.
Combinations:
Loop Cone and Loop Up can be combined with different numbers of Loop Up studs. The recommended quantity is 6 tubs. If desired, the stands can be purchased separately.
Assembly & fixing:
Loop Cone and Loop Up are assembled using one fitting (B14), which is also fixed in the ground. The mounting bracket can be hidden in the soil if desired.
The Loop Cone and Loop Up can also be filled as separate units by filling them with water or sand.
Color choice:
Cone, table top and Loop Up seats can be ordered separately for different color combinations.
The manufacturer offers a separate option to order a product made of 100% recycled polyethylene plastic
of which 85% comes from internal waste and production surplus and 15% comes from polyethylene bags.
The recycled version has an eco-label and can only be ordered in the color: Anthracite* (the color may vary according to the residues in production)
Maintenance:
It resists most detergents and chemicals, and this product can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 201
, Delivery time: 6-8 nädalat
The LOOP TABLE round table+seat offers several seating and comfort options. Loop Table is a small colorful bench and table set.
Ideal for schools, playgrounds and other urban recreation areas.
Design: AART Designers
Material:
Table top: Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear. The material is suitable for granulation and recycling.
Frame: Ø80 mm tubes, hot-dip galvanized (HDG) steel, fully stainless bolts/screws.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Dimensions: Ø700mm / H730mm.
Table top: thickness 50 mm.
Seats 4-6.
Fixation:
The table can be ordered with three different fastening methods.
Freestanding on a three-legged frame:
The LOOP bench and the LOOP table are combined into one unit. Table frame, Ø80mm hot-dip galvanized pipes, connected to a 3-legged frame, 12mm hot-dip galvanized sheet steel. The LOOP bench and LOOP table can stand freely on any surface. The LOOP Bench can be filled with sand/water or fixed to the ground with brackets to prevent theft.
Underground installation:
LOOP Bench and LOOP table as 2 separate units. Loop board Ø80 mm hot-dip galvanized pipes buried up to 300 mm.
Surface mount with bracket:
LOOP bench and LOOP table as 2 separate units. The table has a bracket that allows it to be mounted on concrete, tiles, wood, etc. Ø80mm hot-dip galvanized pipes on flange: Ø180/H:8mm, 3 x Ø12mm mounting holes.
Color choice:
The color selection can be found in the product images.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
Ideal for schools, playgrounds and other urban recreation areas.
Design: AART Designers
Material:
Table top: Rotational molded polyethylene, 6 mm thick, painted. UV-resistant, withstands weather conditions, wear and tear. The material is suitable for granulation and recycling.
Frame: Ø80 mm tubes, hot-dip galvanized (HDG) steel, fully stainless bolts/screws.
Surface coating:
The product has a textured/granulated surface, thanks to which the product is not slippery.
Standard:
TÜV approved as playground equipment accordingly. EN1176.
Dimensions:
Dimensions: Ø700mm / H730mm.
Table top: thickness 50 mm.
Seats 4-6.
Fixation:
The table can be ordered with three different fastening methods.
Freestanding on a three-legged frame:
The LOOP bench and the LOOP table are combined into one unit. Table frame, Ø80mm hot-dip galvanized pipes, connected to a 3-legged frame, 12mm hot-dip galvanized sheet steel. The LOOP bench and LOOP table can stand freely on any surface. The LOOP Bench can be filled with sand/water or fixed to the ground with brackets to prevent theft.
Underground installation:
LOOP Bench and LOOP table as 2 separate units. Loop board Ø80 mm hot-dip galvanized pipes buried up to 300 mm.
Surface mount with bracket:
LOOP bench and LOOP table as 2 separate units. The table has a bracket that allows it to be mounted on concrete, tiles, wood, etc. Ø80mm hot-dip galvanized pipes on flange: Ø180/H:8mm, 3 x Ø12mm mounting holes.
Color choice:
The color selection can be found in the product images.
Maintenance:
This product is resistant to most cleaning agents and chemicals and can be cleaned with a pressure washer. The color can be revived using a vinyl cleaner or similar.
SKU: 181
, Delivery time: 6-8 nädalat
