Road sign clamp 168mm one-sided

- Dimensions: 500x500x300mm
- Hole in the middle Ø max 80 mm and bottom Ø 60 mm
- Weight: 80 kg

NB! The locking ring of the foundation (which holds the traffic sign post upright) is not included in the set. It must be purchased separately. Product code: 31051

Adhesive sign-masking-tape for short-term invalidation of traffic signs
In the presentation black / bright orange / black for use during the day
– size: 100mm x 33 m
– orange-black print
– non-reflective

The installation sleeve is used for quick installation and removal of traffic signs in places where the post is often damaged, e.g. as a result of traffic accidents, turning of trucks, intentional damage or in places where signs are frequently changed.
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!

Sole for Ø60mm metal post
dimensions: 200 x 200 x 8 mm, pipe Ø70 mm L – 300 mm

The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.

Ground sleeve 76 x 400 mm cast iron, including tensioning nut and
PE-Clamping ring

When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 2,7m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.