Round steel tube galvanized Ø48,3 mm

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Round pipe galvanized D=60.3 mm wall thickness 2.0 mm
maximum length 7 m
maximum length 2m for shipping with the courier!

Plastic cap for tube 25X25 mm
black
Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Galv. Heavy Duty Side Palm. Extra heavy fascia attachment for vertical posts. This clamp is not suitable for continuous tubes. Intended for the manual attachment of safety rails and balustrades to the walls, parapets, stairs and ramps with flat mounting.

Female Single Socket. One part of swivel fitting, not generally used alone.

Collar Plate Double Side. Panel fixing with two lugs is also used for locking gates.