Round steel tube galvanized Ø60,3 mm

Rubber tensioners are available in two sizes.

The distance of the print from the inner frame depends on the diameter of the frame tubes.

For a 20cm rubber band:
Tube 42 mm - Distance 9 cm
Tube 48 mm - Distance 8 cm

Plastic cap used to plug the end of the tube.

Cover caps are designed to close and finish pipe ends.
These caps are not intended to cover the clamp holes.

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Corner Swivel 90°. Swivel fitting for variable angle fixing for a corner post.

Black, mounting screw for tube fittings Ø26,9/Ø33,7 mm
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Black, mounting screw for tube fittings Ø42,4/Ø48,3/Ø60,3mm
The advantage of black color is that the color goes very deep into the material, which prevents the pipe member from corroding too quickly.
The black clips are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.