Stainless Steel Cable Tie 7,9x600mm G304
SKU: OBL(600)7,9G304
Unit: pc
Qty: In Stock
Unit: pc
Qty: In Stock
Price:
0,60 €
price inc. tax 0,73 €
Ball-lock cable ties made of AISI 304 stainless steel, 201 provide excellent resistance to high temperatures, corrosion and extraordinary resistance to UV radiation. These cable ties are very easy to install.
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required
Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm
EXAMPLE USE:
• fixing of cables and pipes in shipbuilding, petrochemical plants, offshore platforms and fire risk environments
• „electrical safety” markings in identification label installation (e.g. fire extinguishing system) which must be maintained in the event of fire
• installations where high mechanical and UV resistance is required
Tie width 7,9mm
Tie thickness 0,4mm
Tie lenght 600 mm
Similar products
Cylinder end cap for post Ø60mm
- Ø60/160 mm
- material: aluminum
- color: white
ATTENTION: The price is for one end cap. The figure shows a set of two clamps. The cylinder is also not included.
- Ø60/160 mm
- material: aluminum
- color: white
ATTENTION: The price is for one end cap. The figure shows a set of two clamps. The cylinder is also not included.
SKU: 4014198
, Qty: In Stock
19,50 €
When a vehicle collides with a road sign post, which is equipped with a spring, the road sign restores its upright position.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.
Suitable for traffic poles up to 1.6m long and Ø60mm in diameter
Tested: 70 km/h
Recommended areas of use: parking lots, separation islands, tramways, ring roads, etc.
SKU: 34216913105
, Qty: In Stock
280,00 €
Adapter is perfectly suited for a quick installation of traffic signs.
SKU: 2562265
, Qty: In Stock
5,00 €
The installation sleeve is used for quick installation and removal of traffic signs in places where the post is often damaged, e.g. as a result of traffic accidents, turning of trucks, intentional damage or in places where signs are frequently changed.
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!
The sleeve fits poles with a diameter of 60.3 mm.
The mounting sleeve is not intended to stand alone on the ground. The sleeve must be dug into the ground!
SKU: TMDZ(5616030000)
, Qty: In Stock
, Delivery time: 1-2 nädalat
62,00 €
The Loob screw banding tool is used to tension stainless steel bands with widths of up to 20 mm in all steel grades offered by Loob. It is made of corrosion-resistant galvanized steel.
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,8mm
Dimensions: 220x300x60mm
The tool also has built-in blades for cutting through stainless steel.
It is used together with banding buckles.
The banding machine is suitable for use in a variety of environments.
Mechanism: manual
Band width range: 6,4mm-20mm
Band thickness range: 0,25mm-0,8mm
Dimensions: 220x300x60mm
SKU: BSS
, Qty: In Stock
92,00 €
The mounting sleeve is used to quickly install and remove road signs in places exposed to frequent damage, e.g. as a result of traffic accidents, by turning lorries, intentional damage or in places where signage is often changed.
Steel ground sleeve 48 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
Steel ground sleeve 48 x 500mm hot-dip galvanized, with cast
clamping wedge + allen screw
SKU: 5624850000
, Qty: In Stock
48,75 €
