The universal column protector

The protection consists of 2 elements that are placed around the post and connected to each other using straps. Very easy to install, does not require fixing to the floor or post.
Air chambers inside the modules help absorb impact energy.

- Dimensions of the opening in the middle of the pillar guard: 110*106mm
- Outer size: 360*400mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 10kg
- The product can be used at temperatures: -15c to +40c

Spacers-extensions for CP200 column protection
Dimensions: 1m x 210mm
Set contains of 2 pieces.

Spacers-extensions for CP300 column protection
Dimensions: 1m x 310mm
Set contains of 2 pieces.

The pole protector is suitable for poles from 260mm x 260mm to 320mm x 320mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.

- Dimensions of the opening in the middle of the pillar guard: 260*260mm/320*320mm
- Outer size: 600*600mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 23kg
- The product can be used at temperatures: -15c to +40c

Suitable for columns with dimensions of 200mm x 200mm. Protection contains 1 element, which are placed around the column and connected through straps. Easy to install, does not require fixing it to the floor nor the column. The air chambers inside the modules help to absorb the energy of the collision.
Thickness of the wall: 6.4mm.
Produced of LLDPE material (linear low density polyethylene), UV-protected, suitable for indoors and outdoors conditions.

The pole protection is suitable for posts with a size of 420mm X 420mm.
The protection consists of 2 elements that are placed around the post and connected to each other using straps.
Very easy to install, does not require fixing to the floor or post. Air chambers inside the modules help absorb impact energy.
Wall thickness 6.4mm.
Made of LLDPE material (linear low density polyethylene), UV resistant, suitable for both indoor and outdoor use.
250mm and 110mm infills are available to extend protection.

- Dimensions of the opening in the center of the pillar guard: 420*420mm/ expandable to 480*480mm with connecting joints.
- Outer size: 800*800mm
- Made of LLDPE material (linear chain low density polyethylene)
- UV resistant, suitable for both indoor and outdoor use.
- Product weight: 34kg
- The product can be used at temperatures: -15c to +40c