Type 11 Square base plate Ø42,4mm

Angle clamp that allows two pipes to be connected at an angle of 15° - 60°. It is suitable for building a staircase structure, for example. The clamp is made of hot-dip galvanized malleable iron, durable, corrosion-resistant and long-lasting. Meets TÜV requirements.

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters - horizontal Ø48.3 mm and vertical Ø42.4 mm.

Corner Swivel 90°. Swivel fitting for variable angle fixing for a corner post.

Internal Coupling. A streamlined flush joint in two tubes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.

Two Socket Cross. 90° joint clamp between the middle rail and an upright on railings with different size Ø42,4mm/48,3 mm.