Type 18, 3-Way Elbow Ø48,3

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Clamp-On Crossover. Open cross connection where the railing is placed in the connection and can then be secured.

Adjustable Knee Piece. Variable elbow fitting. This tubefitting can make a minimum angle of 75 degrees to a maximum of 210 degrees.

Two Socket Slope Cross. Joint clamp between the middle rail and upright on slope railings up to 11°.

Add-on Crossover 90°. Same tubefitting as type 28 but this tubefitting can be placed on an existing construction by means of a foldable part.

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.