Type 201, Clamp-On Crossover Ø48,3mm

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Round pipe galvanized D=33.7mm wall thickness 3,2 mm
maximum profile length 6 m
maximum length for delivery by courier is 2 meters!

A banner frame made of smart clips, which is made according to the dimensions of the banner.
We offer frames with two sizes of tubes:
- D=42.4mm, pipe wall thickness 2.6 mm
- D=48.3mm, tube wall thickness 2.9 mm

Sample products are complete in 4 different variations:
With a 42.4mm diameter pipe and clamps, sizes 1000x1000m and 2000x2000mm (the price does not include the banner, hooks, elastics or fixing clamps.)
With 42.3mm diameter pipe and clamps, size 1000x1000m and 2000x2000mm (the price does not include banner, hooks, elastics or fixing clamps.)

The products with the given dimensions are presented for informational purposes. We can complete the frames according to your desired dimensions. To do this, fill out the inquiry basket form or write to us at info@tubex.ee
When asking for a price quote, please consider that the outer dimension of the banner frame = canvas size + 26 cm (only when using rubber bands or standard hooks)

Slope Elbow 90° Variable angle 0° - 11°. Elbow joint fitting used as an end fitting for the top rail up to 11°.

Two Socket Cross - 25 mm. 90°- joint clamp between the middle rail and an upright on railings.

A cross with four slots. A 4-way clamp used to attach uprights with 4 horizontal tubes perpendicular to each other. The standpipe passes through the clamp.
Suitable for square tube 25 x 25 mm