Type 3, Short T-clamp 45° Ø48,3

Add-On Two Socket Cross. Openable 90° connection clamp between the central rail and the railing pillars.

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

Long Tee. Similar to Type 2. This fitting can be used where a join is required in the horizontal tube.

Double Swivel. Swivel fitting for variable angle fixing for two sides of the post.

Internal Coupling. A streamlined flush joint in two tubes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.

Designed to attach a freestanding handrail to an upright post on a variable angle.

The 752 Interclamp fitting is designed for intermediate support of horizontal galvanised handrail tubes where no joining of the tubes are required. They are also used when fitting the 724 Assist handrail end termination to the upright post.