Type 64S, Hook twisted, black - 25x25 mm

Slope Elbow 90° Variable angle 0° - 11°. Elbow joint fitting used as an end fitting for the top rail up to 11°.

Square footplate - 25 mm. Use this clamp for positioning constructions. Do not use as a basis for supporting safety railings and the like.

Two Socket Cross - 25 mm. 90°- joint clamp between the middle rail and an upright on railings.

This fitting can be used where a join is required in the horizontal tube.
Suitable for square tube 25 x 25 mm

Steel galvanized square 25x25 mm tube profile / socket of 2 mm thickness.
This profile has a standard trade length of 6 meters, but can always be cut to size for you.
Suitable for our square tubefittings.

The advantage of black color is that the color goes very deep into the material, which prevents the pipe from corroding too quickly.
The black tubes are also suitable for outdoor use, but it must be taken into account that the color is not resistant to UV radiation, and long-term exposure of the product to outdoor conditions will cause the color to fade.

Maximum length for shipping with couriers is 2 meters!

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.