Type 747, DDA Assist Expanding Internal Swivel BracketØ48.3 mm

The 751 fitting is designed for intermediate support of horizontal galvanized handrail tubes where no joining of the tubes is required.

Round tube D=42.4mm
wall thickness 2.65 mm
powder coated yellow
maximum profile length 3 m

Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.

Short Tee, long. Same as type 2 but longer, with three adjusting screws.

Short Slope Tee Variable angle 0° - 11°. Top fitting for up to 11° uprights. This fitting can not be used to join horizontal tube within the fitting.

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters - horizontal Ø42.4 mm and vertical Ø48.3 mm.