Type 85, Eves Fittings 27½° Ø48,3 mm

Base flange for sloping sites, adjustable from 11° to 29°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design.

Two Socket Cross. 90° joint clamp between the middle rail and an upright on railings.

Long Tee. Similar to Type 2. This fitting can be used where a join is required in the horizontal tube.

Adjustable Short Variable angle 45° - 60°. This adjustable angle clamp is used to join tubes between 45° and 60°. Use for diagonal braces, struts and an angled top rail joint to vertical posts on stairs.

Butt joint for sloping sites, adjustable from 11° to 29°, often used to join intermediate uprights to top rails and middle rails to end uprights. This Interclamp cannot be used where through tube (sloping in photo) has to be joined within the fitting.

Collar Plate Double Side 90°. Panel fixing with two lugs also used for locking gates.