Heskins

Surface primer is ideal for sealing porous surfaces such as wood, concrete or stone prior to application of our anti-slip tape to prevent moisture degrading the adhesive; it also greatly helps to create an extra bond on other surfaces.
- seals porous surfaces
- 0,5L covers 2,5m2

Floor sticker "Pedestrian"
L328xH500mm
Material: polycarbonate (PC), R11
Thickness: 1.6 mm
Color: yellow

Suitable for concrete and asphalt surfaces

Indoor floor sticker"Forklift Triangle"
H430mm

Reflective tape is a simple, self-adhesive, high visibility safety tape, suitable for marking out potentially hazardous or dangerous areas. It can be effectively used in any environment and takes literally minutes to apply.
Reflective marking tape is perfect for application in walkways, stairways, ledges, low hanging objects etc.

– indoor and outdoor marking
– RA1 reflective class

– roll length: 10m
– roll wide: 50 mm
– colour: red, yellow, white/grey, blue, green, red-white, yellow-black

Application:
Surface must be clean, dirt free and dry.

Glow in the dark directional tape is a chevron patterned photolu­min­escent egress tape with excellent glow in the dark properties.
The product has endless applications but the directional arrow markings combined with the glow in the dark properties can highlight exits, egress points, access routes and provide guidance down walkways and towards the aforem­en­tioned areas.
Glow in the dark directional egress tape features a black chevron print on the surface and then is covered with a laminate to prevent the print wearing during use.
Photoluminescent tape with black arrows 50mm x 10m
Afterglow of 4-6 hours after sufficient charge

Material: PVC
Glue: Acrylic
Dimensions (W x D): 5 cm x 10 m
Thickness: 0.79 mm
Color: glow in the dark with black print

Installation:
The surface must be clean, grease-free, dust-free and dry. The tape can be cleaned with warm water and soap.

Exit Hazard Tape is perfect for marking stairs, walkways, access areas, exits, etc.
The tape is more visible in daylight and the photoluminescent strip has a pattern running at a 45° angle.
Black details do not glow in the dark.

Available in 10m rolls with a width of 25mm to 1150mm.

– material: PVC
– material thickness: 0.8 mm
– glue: acrylate
– area of use: indoor spaces
– adhesive surface: smooth concrete, EP/PU/MMA coating, tile floor
– load: pedestrians, pallets
– 4-6 hours of afterglow

– 10m in a roll
– roll width: 25mm, 50mm, 75mm, 100mm.

Installation:
The surface must be clean, grease-free, dust-free and dry. The marking tape can be cleaned with warm water and soap.

Glow in the dark anti-slip tape is ideal for highlighting critical areas and especially in the event of a power outage.

During the day, the glow-in-the-dark anti-slip tape appears to be a soft green shade, in the dark or when any lights are turned off, it emits a bright white light.
The photoluminescent Safety-Grip can be charged with both natural and artificial light sources. The duration of light emission varies depending on the amount of light received.
It usually clears up within a few hours. The material does not contain radioactive products, so it can be used in many environments.


• The self-adhesive plastic base is photoluminescent.
• The back of the sticker is held to the film by means of a flexible resin; the resin is impregnated with a photoluminescent, glow-in-the-dark paste.

– rolled 18.3m
– roll width: 25mm, 50mm, 75mm, 100mm, 150mm.

Installation:
The surface must be clean, grease-free, dust-free and dry. The marking tape can be cleaned with warm water and soap.